Published at Sunday, 06 May 2018. Toilet Seat. By Orianne Tiphanie.
The flush of water in most toilets comes from 30 to 60 holes beneath the rim of the bowl. Often this area can build up with grunginess from waste and minerals left behind by the trickle of water. In new designs from Toto the multihole method is replaced with a Tornado flush which consists of two jets that spin the water at high speed to remove grime.
“They’re fantastic” Guy says of the new smart toilets. “We are not using as much water. Bidet seats are reducing the amount of paper use after you’ve gone number two. Low-flush toilets have caused nothing but issues with clogged sewer lines”. Toto’s Strang agrees. “The next step of toilet evolution is getting down to the lowest possible water consumption” he says. Most Toto toilets now flush with only 1 gallon vs. the national standard of 1.6 gallons per flush. “We’re phasing out all higher-flush toilets and moving down to the 1-gallon solution” he says. But water conservation isn’t the only hurdle toilet manufacturers face.
Kohler’s PureTide shown here is a manual bidet seat without the need for electricity. It operates just on water pressure alone. So if your power goes out you’re still good. The water isn’t heated so “people need to get a little accustomed to that” Allis says. But it installs quickly and simply. The cost is a little over $100 and can work on pretty much any current toilet. And that brings up another one of the biggest hurdles that manufacturers face in getting integrated smart toilets into consumers’ homes: education on wet vs dry cleaning.
Any content, trademark’s, or other material that might be found on the ozbarphx website that is not ozbarphx’s property remains the copyright of its respective owner/s. In no way does ozbarphx claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 ozbarphx. All Rights Reserved.