Published at Sunday, 06 May 2018. Toilet Seat. By Kornelia Nicole.
Rarely is it practical to move a toilet if you aren’t designing your bathroom from scratch (i.e. during a new build). If possible keep in mind that a toilet should be a minimum of 15 inches from nearby objects (such as showers walls and vanities) measured from the centerline of the toilet. For more comfort 18 or more inches is recommended. If you can’t relocate try to avoid adding obstacles such as towel bars and consider using a small vanity. Also an elongated toilet seat (longer and narrower than a standard rounded seat) may give you a little extra leg room.
Kohler’s PureTide shown here is a manual bidet seat without the need for electricity. It operates just on water pressure alone. So if your power goes out you’re still good. The water isn’t heated so “people need to get a little accustomed to that” Allis says. But it installs quickly and simply. The cost is a little over $100 and can work on pretty much any current toilet. And that brings up another one of the biggest hurdles that manufacturers face in getting integrated smart toilets into consumers’ homes: education on wet vs dry cleaning.
Installation will become easier too. Systems such as ReadyLock from Kohler allow toilets to be installed without the need of additional drilling into the floor. “If you talk to plumbers there’s nothing they hate more than drilling into a marble floor” Allis says. “With our system there’s no secondary attachment point required”.
Any content, trademark’s, or other material that might be found on the ozbarphx website that is not ozbarphx’s property remains the copyright of its respective owner/s. In no way does ozbarphx claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 ozbarphx. All Rights Reserved.