Published at Wednesday, May 09th 2018. by Orianne Tiphanie in Toilet Seat.
Rarely is it practical to move a toilet if you aren’t designing your bathroom from scratch (i.e. during a new build). If possible keep in mind that a toilet should be a minimum of 15 inches from nearby objects (such as showers walls and vanities) measured from the centerline of the toilet. For more comfort 18 or more inches is recommended. If you can’t relocate try to avoid adding obstacles such as towel bars and consider using a small vanity. Also an elongated toilet seat (longer and narrower than a standard rounded seat) may give you a little extra leg room.
In the end though Garg and Singh conclude that “both methods were perhaps developed and have survived for centuries of usage because of the dietary fiber habits of these populations. Therefore both methods are scientifically correct and suit the populations where they are being used”. Nevertheless the top toilet manufacturers recognize the divide and note that places such as China and Japan are adopting smart toilets much more quickly than in the U.S. Walsh from American Standard says the rate of adoption is going up in America though it’s far from where it is in Japan.
Kohler’s PureTide shown here is a manual bidet seat without the need for electricity. It operates just on water pressure alone. So if your power goes out you’re still good. The water isn’t heated so “people need to get a little accustomed to that” Allis says. But it installs quickly and simply. The cost is a little over $100 and can work on pretty much any current toilet. And that brings up another one of the biggest hurdles that manufacturers face in getting integrated smart toilets into consumers’ homes: education on wet vs dry cleaning.
Installation will become easier too. Systems such as ReadyLock from Kohler allow toilets to be installed without the need of additional drilling into the floor. “If you talk to plumbers there’s nothing they hate more than drilling into a marble floor” Allis says. “With our system there’s no secondary attachment point required”.
The standard height for a toilet seat is 17 inches one inch lower than the standard height for a chair seat. However most manufacturers also produce at least some of their models in a “comfort” height which is typically 19 inches. From a medical perspective lower toilet seats are recommended for typical users. However for those who have trouble getting into and out of a sitting position (such as the elderly or even simply the very tall) the comfort-height seat may be easier to use. If you don’t find standard toilets to be an issue ignore the comfort option and worry more about the distance your toilet sits from the wall.
Any content, trademark’s, or other material that might be found on the ozbarphx website that is not ozbarphx’s property remains the copyright of its respective owner/s. In no way does ozbarphx claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 ozbarphx. All Rights Reserved.